Skip to content

How to set up a VPN on a DD-WRT router

Configure a PPTP VPN connection on a DD-WRT router, then connect to your VPN provider from the WAN status page.

Updated November 14, 2026 1 min read


This guide shows how to set up a Point-to-Point Tunneling Protocol (PPTP) VPN connection on a wireless DD-WRT router.

Before you start

You need a working internet connection, a router that supports PPTP, and a VPN account.

A VPN connection does not work on an ISP modem. To make the VPN connection work, connect the DD-WRT router to the modem.

Set up the VPN on the router

  1. Connect the router to your computer with an Ethernet cable, or connect to the router over wireless. The diagram shows option 1a for Ethernet and option 1b for wireless.
  2. Open the Basic Setup tab. From the Connection Type drop-down menu, select PPTP.
  3. Under Use DHCP, select Yes.
  4. In Gateway (PPTP Server), enter the server name from your VPN provider.
  5. Enter your Username and Password in the matching fields.
  6. In Additional PPTP Options, enter refuse-eap.
  7. Go to the DHCP Server section and make sure it is Enabled.
  8. Click Apply Settings.
  9. Click Save.
  10. In the menu bar, select Status, then select the WAN tab.
  11. Click Connect to connect to your VPN provider.

More in Troubleshooting

Still stuck?

Our support team can help you set up your device or fix a problem.

Contact support